Semi-mounted reversible plow SMRP-(4,5,6)-35/50К

The plows is equipped with spring protection.


Designed for smooth plowing soils with stones, with hardness up to 0.4 MPa, with a moisture content of the treated layer 25%. The slope of the field surface should not exceed 8°. The size of the stubble and grass stand should not exceed 25 cm. The presence of accumulations of unharvested straw in the field is not allowed.

Using semidigger buildings with elements such as a chisel blade and chest can increase their life-changing only the Wear elements, prolonging the life of more expensive plowshare and the wing blade, respectively.

Main advantages

A large range of plow widths from 1.4 to 3 meters allows you to replace a whole range of plows from 4 to 8 sleeves. Adjustable working width per sleeve (35, 40, 45, 50) allows you to adapt to soil conditions and tractor fleet. The modularity of construction of 4, 5, and 6 body frames. Reinforced double tube frame made of medium alloy steel. Dual rear support wheels (support width 760 mm). In the transport position, it is included in the transport clearance, which allows you to move freely on public roads (width 2.5 m). Ability to work in two modes, "on-land" - in the field and "of-land" in the furrow. Frame versatility - it is possible to install on the same body frame with different safety systems (spring, shear bolt).

This model of the plow can be equipped with a plow-point - tool for cutting the topsoil and dumping it into the furrow, which contributive to complete destruction, strangulation of weeds.


The plow can be equipped with feather molds.


Installation of the front support wheels for plows through the system "on-land" - on the field or at the idle position, the power regulator in the tractor.

SMRP -6-35 / 50K with Kiryusha 240 hp width 6x45

SMRP -6-35 / 50K with CASE 210 hp width 6x35

SMRP -6-35 / 50K Grodno region

Show all
Technical specification6-35/50K5-35/50K4-35/50K
Type hinged semi-mounted semi-mounted
Overall dimensions in working position: (L*W*H), m 9,1*2,8*1,8 8,1*2,8*1,8 7,2*2,8*1,8
Dimensions in transp. position: (l*w*h), m 8,6*1,8*3,2 8,1*1,8*3,2 7,2*1,8*3,2
The number of sleeves, pcs 6 5 4
Productivity for 1 hour of main time, ha 1,47-3,0 1,2-2,5 0,98-2,0
Working speed of movement, km/h 7-10 7-10 7-10
Transport speed, km/h, no more 10 10 10
Structural width of the capture of the sleeve, see 35/40/45/50 35/40/45/50 35/40/45/50
Constructive width of the capture of the plow, m 2.1/2.4/2.7/3.0 1.75/2.0/2.2/2.5 1.4/1.6/1.8/2.0
Plowing depth, no more, see 27 27 27
Weight, kg 3900 3500 3100
Distance from the reference plane of the bodies to the lower plane of the frame, mm, not less 720 720 720
Distance between sleeves along the course, mm, not less 980 980 980
The plow is equipped with semi-screw bodies, offset lifters, protection of the working bodies with a spring.
The SMRP - 4-35 / 50K plow is aggregated with class 2 tractors.
The SMRP - 5-35 / 50K plow is aggregated with class 3 tractors.
The SMRP - 6-35 / 50K plow is aggregated with tractors of the 4th and 5th classes.

Write to us

Call request

We use cookies, tracking and (re-)targeting technologies to optimise and continuously improve our website for individual users. By continuing to visit this site you agree to our use of cookies.