Semi-mounted reversible plow SMRP-6-35/50-01
The plow is equipped with protection - a shear bolt.
Designed for smooth plowing to a depth of 27 cm in old-arable, weakly stony and medium-stony soils, with a resistance up to 0.09 MPa (0.9 kgf/cm2), the hardness of up to 30 N/cm3,
Using semidigger buildings with elements such as a chisel blade and chest can increase their life-changing only the Wear elements, prolonging the life of more expensive plowshare and the wing blade, respectively.
Main advantages
A large range of plow widths from 1.4 to 3 meters allows you to replace a whole range of plows from 4 to 8 sleeves. Adjustable working width per sleeve (35, 40, 45, 50) allows you to adapt to soil conditions and tractor fleet. The modularity of construction of 4, 5, and 6 body frames. Reinforced double tube frame made of medium alloy steel. Dual rear support wheels (support width 760 mm). In the transport position, it is included in the transport clearance, which allows you to move freely on public roads (width 2.5 m). Ability to work in two modes, "on-land" - in the field and "of-land" in the furrow. Frame versatility - it is possible to install on the same body frame with different safety systems (spring, shear bolt). Installation of the front support wheels for plows through the system "on-land" - on the field or at the idle position, the power regulator in the tractor.
The plow can be equipped with feather molds.
This model of the plow can be equipped with a plow-point - tool for cutting the topsoil and dumping it into the furrow, which contributive to complete destruction, strangulation of weeds.
| Name of plows | SMRP-4-35/50-01 | SMRP-5-35/50-01 | SMRP-6-35/50-01 |
|---|---|---|---|
| Type | Semi-mounted reversible | Semi-mounted reversible | Semi-mounted reversible |
| Productivity for 1 hour of main time, ha | 0,98-2,0 | 0,98-2,0 | 0,98-2,0 |
| Working speed, km /h | 7-10 | 7-10 | 7-10 |
| Plowing depth, no more, see | 27 | 27 | 27 |
| The number of sleeves, pcs | 4 | 5 | 6 |
| Type of shell | semi-screw | semi-screw | semi-screw |
| Structural width of the capture of the sleeve, see | 35, 40, 45, 50 | 35, 40, 45, 50 | 35, 40, 45, 50 |
| Constructive width of the capture of the plow, m | 1.4, 1.6, 1.8, 2.0 | 1.75, 2.0, 2.25, 2.5 | 2.1, 2.4, 2.7, 3.0 |
| Distance from the reference plane of the bodies to the lower plane of the frame, mm, not less | 720 | 720 | 720 |
| Distance between sleeves along the course, mm, not less | 980 | 980 | 980 |
| The number of staff in skills needed for the operation directly related to the operation of the machine, persons | 1 tractor driver | 1 tractor driver | 1 tractor driver |
| Weight, kg | 2800 | 3200 | 3500 |
| Plow overall dimensions in working position, no more than mm: | |||
| -length | 7200 | 8100 | 9000 |
| -width | 2800 | 2800 | 2800 |
| -height | 1800 | 1800 | 1800 |
| Plow overall dimensions in transport position, mm: | |||
| -length | 7200 | 8100 | 9000 |
| -width | 1800 | 1800 | 1800 |
| -height | 3200 | 3200 | 3200 |
| Ground clearance, mm, not less | 250 | 250 | 250 |
| Transport speed, km/h, no more | 10 | 10 | 10 |
| Shift time utilization, not less | 0,75 | 0,75 | 0,75 |
| Process reliability factor, not less | 0,98 | 0,98 | 0,98 |
| Indicators of the quality of the technological process: | |||
| -the set depth deviation, cm | ±2 | ±2 | ±2 |
| -permissible the design width of the plow deviation,% | ±10 | ±10 | ±10 |
| -seeding depth of plant and crop residues, cm | not less 10 | not less 10 | not less 10 |
| -drilling depth of plant and crop residues, cm | 98 | 98 | 98 |
| -crumbling of the formation (mass fraction of fractions, up to 5 cm), cm, not less | 70 | 70 | 70 |
| -field ridgeness surface, cm, no more | 5 | 5 | 5 |
Write to us